JANTY® MINIFOGGER MANUAL
The JANTY Minifogger consists of a lithium ion battery, atomization chamber, and a cartridge. The atomization cartridge contains a liquid container. The dilution stored in this liquid container is for one-time-only use.
Screw a battery in the charger. Connect the charger to the power outlet. 1. The first charge should be kept for 8 hours, even if the LED light turns green. 2. Use for 20 minutes. 3. Charge the battery for another 1 hour. Your battery is now ready for normal use. Normal charging time should be kept for 1 hour (even if the LED light turns green). Do not use the charger in damp areas. Do not charge the battery near a high-temp heat source. Do not weld or pierce the battery. If the battery is found to be emitting any odor or heat or be discolored or deformed or have any abnormally during charging, please cut off the power source immediately and remove the battery from the Fogger body or charger and suspend the use of it. The JANTY® Minifogger charger can only be used with the JANTY® dedicated lithium ion batteries. Do not try to use this charger to charge other kind of battery. Please keep the JANTY® and it's components and cartridges from the reach of children or animals.
For safe and effective use of the JANTY® Minifogger and its supporting products, please read through the following information carefully before use and follow the standard operating procedures strictly. Click a cartridge in the atomizer. Screw a battery on the atomizer. Your JANTY® Minifogger is now ready for use. When in use, a small LED light on top of the body will light up. When not in use, the LED light will turn off and the Minifogger returns to stand-by mode. Do not use the Minifogger in a vertical position, since liquid could leak. In case the minifogger should vaporize continuously, or in case the Minifogger shows signs of over heating, stop the usage, unscrew all parts and contact your JANTY® dealer. Change the battery when the Minifogger produces no more significant vapor with a new cartridge. Screw the battery from the atomizer and charge the battery for 1 hour, even if the LED light turns green. Change the cartridge when the Minifogger produces no more significant vapor with a full battery.
If the Battery flashes slowly 20 times in a row, it indicates that it may be time to replace it.
The built-in micro-computer controlled programs has a self-cleaning function; after 1,500 vaporizations, the indicator in front of the battery body flash for 6 seconds, which means that the micro-computer controlled programs are cleaning the unit automatically.
In order to prevent overuse, the front indicator will flash for 10 seconds if the Minifogger is used 15 times in 1 minute.
The atomizer does not need to be cleaned with water. However, if you should encounter persisting malperformance you can try to rinse the atomizer with water and blowing the water though the atomizer several times. The atomizer should be dried with a hairdryer after this process. When the atomizer is fully dry, insert a new cartridge and operate the Minifogger until vapor is produced. Sometimes it might help to drop a small amount of liquid directly onto the atomizer to kick start it in case the atomizer is too dry.
We do not accept any warranty/indemnity claims in case of wrong usage. If you are carrying the Minifogger with you, please carry it separately in order to avoid scratches or damage due to collision with other parts such as keys or mobile phones. The use of any non-dedicated components will lead to malfunction and damage of this product. The use of other than JANTY® cartridges or the use of liquid will damage the atomizer beyond repair. Please dispose of old batteries in your local battery recycling collection point. When driving, please ensure your strict compliance with the relevant laws and regulations of the country or region where you are staying. Be concentrated on driving and pay attention to road conditions. Do not use this device while driving and secure all parts to avoid damage to the product caused by collision. The JANTY® Minifogger uses an advanced microelectronic technology to vaporize a special designed GRAS (generally recommended as safe) approved liquid that is contained in cartridges that are inserted into an atomizer. The main ingredients of the liquid are water and non-carcinogenic and non-toxic common legal food-and taste additives.
To prevent overuse, the atomizer will shut off and flash for 10 seconds if used more than 15 times in 1 minute.
Storage: The Minifogger and its supporting parts should be kept away from children's reach and stored safely in a non-damp environment.
Preparation: Leave the atomizer without cartridge to dry for the night by storing the atomizer vertically on a paper tissue or dry rack. Charge your batteries at night.
The JANTY® Minifogger should be maintained regularly.
Clean the screws threads of the different parts such as atomizer, chargers and batteries with a tissue dipped in purified un-perfumed alcohol (please refer to your local drugstore). Clean screw thread will provide better electric conduction. Blow into the atomizer once and a while to evacuate left over liquid. Remove cartridge at night. Put the atomizer to dry for the night on a dry rack. When the vapor diminishes significantly the battery needs to be charged.
Battery and charger
The JANTY® Minifogger is powered by a 3.7 V special Lithium Ion battery. The charger is specially adapted for JANTY® batteries. The voltage is AC100V-240V 50/60Hz. Each charger has a DC in 5V connector on the side, which can be used to charge the batteries with a car charger cable (not included). Only use AC100V-240V 50:60Hz voltage.