Janty eGo Variable Volt USB Battery (Improved Version)
1x Janty eGo Variable Volt USB Battery
1x USB cable (1.5ml)
Color: BLACK
mAH: 900
Puffs on a full charge: approx 900 puffs
Material of cylinder: steel
Warranty
Janty eGo Batteries are covered by our Janty Warranty Program for 3 months from the delivery date and atomizers (except LR and TAWA) for 6 months. We will not guarantee products that have been damaged through improper use or intentional damaged.
Some like it hot – some like it hotter, and then there’s the days where you actually wouldn’t mind taking it down a notch!
Well now you can, with the all new eGo variable voltage battery. With five simple clicks, you can go from 3.2 volt, to 3.7 volt, and all the way up to a whooping 4.2 voltage!
If we had all been cavemen, this would have been the item to run around with, while yelling “I am the god of fire!”
But, since we’re not, we will just say that this is an extremely useful battery which can be used with any existing [Janty eGo] device or [accessory] you might have! it is compatible to use with a normal eGo charger.
The battery comes in a 900 mAH configuration –enough for 1-2 days of continuous vaping ( depending on voltage output and how much you vape ).
The Janty VV Battery is regulated but Voltage can be changed by manual adjustments.
The LED indicators are as follows:
o Blue LED: 4.2 volt o Purple LED: 3.7 volt o Red LED: 3.2 volt o Low battery: LED Ring will flash o This device is capable of USB charging – and smoking while charging
Color: BLACK
Color of LED: White
Dimensions: 103mm x 14mm
Battery mAH: 900 Material of battery tube: Stainless steel
Charging procedure:
1. Remove bottom cap at end of battery. 2. Gently insert section A of USB cable to the battery. 3. Insert section B into a USB port. 4. The port on the battery itself will light up (RED) to indicate charging is on. 5. The port on the battery will turn off when the battery is fully charged.
How to use: Press the activation switch five times in order to step through the available voltages:
The LED indicators are as follows:
1. Blue LED: 4.2 volts 2. Purple LED: 3.7 volts
3. Red LED: 3.2 volts 4. Low Battery: LED Ring will flash
Press the activation switch while inhaling from the cartridge. Stop pressing the activation switch when the desired volume of smoke is achieved. The battery will cut-ff power when being pressed continuously for 12 seconds, to avoid overheating.
To refill cartridge, drop 3-4 drops of liquid directly to the atomizer, through cartridge. In case of leakage between atomizer and battery, wipe excess liquid with dry cloth or tissue - reduce number of drops if needed.
Cleaning battery before charging:
Unscrew everything from the battery so you only have the battery itself in your hand, then gently with a soft cloth or paper tissue, wipe the inside of the screw thread area where you normally screw on your atomizer. If this spot is wet when you attach the battery to the charging unit, you could damage both.
Cleaning battery in general: Same method as above – rule of thumb is; Clean your battery / wipe it down, everytime you charge it.
NOTE: Batteries are a highly volatile substance, and should be treated as such. Our batteries are high quality, and well protected from abuse by our patented chipset, and the steel casing they lie in. However, there are a few precautions we would like to ask you to make when handling your e-cigarette;
1. When charging make sure to always wipe the end of the battery for excess liquids
2. When charging always place the battery and charger on a non flammable surface, out of reach of easy flammable items (curtains, cloth, tissue etc.)
3. Never charge your batteries unattended
4. Never charge your batteries while asleep
This product is compatible with all Janty eGo and Janty NEO accessories.
N/A
N/A
Customer Reviews
Rating
Romano Perelli - Tuesday, 17 April 2012
Awesome battery, perfect coupled with a LR cartomizer.
Rating
Olaf Hirtz - Monday, 19 March 2012
Sauber verarbeitetes Gerät. Nutze den Akku mit einem Janty eDC Cartomizer. Da kommt Dampf. Mir persönlich genügte es bisher, die eDC Cartos mit nem
650er Akku zu betreiben. Aber jetzt auf mittlerer Stufe eingestellt: Klasse! Und bei Vollgas: Genial!! Für das Geld, absolut zu empfehlen.
Rating
Henry Richter - Monday, 05 March 2012
Ein "geiles" Teil, vorallem mit dem Clearomizer CE4+ !
Rating
Sascha Blotenberg - Wednesday, 29 February 2012
Super klasse habe ihn heute bekommen und bin beeindruckt. So macht das Dampfen richti Spaß ;-)
Rating
Benjamin Waßmann - Tuesday, 14 February 2012
würde ich gerne wieder kaufen! sehr gute verarbeitung, schönes design, guter taster
Romano Perelli - Tuesday, 17 April 2012